(C) The act of June 25, 1982 (P.L.633, No.181),
known as the Regulatory Review Act.
(ii) Any temporary regulations adopted under this
paragraph shall expire after three years, or upon
promulgation of final regulations for this subsection,
whichever is sooner.
[(e) Distance requirements for use of mechanical, electrical
and electronic devices.--Mechanical, electrical or electronic
devices may not be used to time the rate of speed of vehicles
within 500 feet after a speed limit sign indicating a decrease
of speed. This limitation on the use of speed timing devices
shall not apply to speed limit signs indicating school zones,
bridge and elevated structure speed limits, hazardous grade
speed limits and work zone speed limits.
(f) LIDAR testing and calibration.--
(1) The department may, upon publication in the
Pennsylvania Bulletin, provide that LIDAR speed measuring
devices and LIDAR systems shall be calibrated and tested
using the testing procedures in department regulation.
(2) LIDAR speed measuring devices and LIDAR systems
shall be calibrated and tested every 365 days at a minimum
before being utilized by the Pennsylvania State Police or as
part of an automated speed enforcement system.
(3) The certification that the LIDAR device and system,
as applicable, have been tested and found to be accurate
shall create a presumption that the requirements of this
subsection have been fulfilled.
(4) As used in this subsection, the following words and
phrases shall have the meanings given to them in this
paragraph unless the context clearly indicates otherwise:
20230SB0459PN0380 - 6 -
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30