manufacturer or distributor.
(2) The brand or trade name of the material.
(3) The identification of the product as to the type of
the agricultural liming material.
(4) The net weight of the agricultural liming material.
(5) The minimum percentage of calcium oxide and
magnesium oxide and/or calcium carbonate and magnesium
carbonate.
(6) Calcium carbonate equivalent as determined by
methods prescribed by the Association of Official Analytical
Chemists. Minimum calcium carbonate equivalents as prescribed
by regulation.
(7) The minimum percent by weight passing through United
States Standard sieves as prescribed by regulations.
(8) The minimum percentage of molybdenum (Mo).
* * *
(e) The secretary may, after a public hearing, require by
regulation thereafter that the minimum percentage of calcium
oxide [and], magnesium oxide and THE MAXIMUM PERCENTAGE OF
molybdenum shall be expressed in the following form:
Total Calcium (Ca) ________percent
Total Magnesium (Mg) ________percent
Total Molybdenum (Mo) ________percent
The secretary may not impose such regulatory standards if they
conflict with labeling requirements of other states and if they
would thereby constitute an economic hardship on the industry
due to dual labeling requirements. The effective date of said
regulation shall not be less than 18 months following the
adoption of regulations. For a period of two years following the
effective date of the regulations the equivalent of calcium and
20180HB2034PN3171 - 2 -
<--
<--
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30