PRINTER'S NO. 1058
No. 962 Session of 1997
INTRODUCED BY GERLACH, KUKOVICH, HART AND BRIGHTBILL, MAY 5, 1997
REFERRED TO URBAN AFFAIRS AND HOUSING, MAY 5, 1997
AN ACT 1 Amending the act of November 17, 1982 (P.L.676, No.192), 2 entitled "An act establishing standards for the body and 3 frame design and construction and the installation of 4 plumbing, heating and electrical systems for manufactured 5 homes; defining terms; requiring manufactured homes to bear a 6 label issued by the United States Department of Housing and 7 Urban Development; providing for the administration of the 8 act; providing for enforcement and penalties; and making a 9 repeal," adding definitions; providing for installation of 10 manufactured homes; establishing additional fees; and 11 establishing the Industrialized Housing Account. 12 The General Assembly of the Commonwealth of Pennsylvania 13 hereby enacts as follows: 14 Section 1. The Definition of "department" in section 2 of 15 the act of November 17, 1982 (P.L.676, No.192), known as the 16 Manufactured Housing Construction and Safety Standards 17 Authorization Act, is amended and the section is amended by 18 adding definitions to read: 19 Section 2. Definitions. 20 The following words and phrases when used in this act shall 21 have, unless the context clearly indicates otherwise, the 22 meanings given to them in this section:
1 "Certified installer" or "installer." A manufacturer, dealer 2 or third person certified under section 3.1 to engage in the 3 installation of manufactured homes on site. 4 * * * 5 "Department." The Department of Community [Affairs] and 6 Economic Development of the Commonwealth of Pennsylvania. 7 * * * 8 "Installation." The assembly of manufactured homes on site 9 and the process of affixing manufactured homes to land, a 10 foundation, footings, utilities or an existing building. The 11 term includes the process of affixing manufactured home 12 components to or within the housing structure for which they are 13 designed. 14 * * * 15 Section 2. The act is amended by adding sections to read: 16 Section 3.1. Installation of manufactured homes. 17 (a) The department shall present a certificate to install 18 manufactured housing onsite to any individual who presents 19 evidence satisfactory to the department that the individual has 20 attended and satisfactorily completed a manufactured housing 21 installation course of study approved by the department at which 22 instruction has been given concerning soil density and ability 23 to determine soil density, an understanding of installation 24 instructions and the principals of weight distribution of 25 manufactured home to foundation. To satisfy these requirements, 26 a course of study shall include classroom instruction, field 27 directions for installation and a written test. The department 28 shall promulgate regulations to require each installer to 29 participate in continuing education programs and to demonstrate 30 continued competency and compliance with this act in order to 19970S0962B1058 - 2 -
1 remain certified. 2 (b) Notwithstanding any other statute, regulation or 3 ordinance, a manufactured home shall be installed by an 4 installer in accordance with one or more of the following: 5 (1) The manufacturer's recommended installation 6 requirements as set forth in 24 CFR 3280 (relating to 7 manufactured home construction and safety standards). 8 (2) Manufactured home installations approved by the 9 American National Standards Institute as ANSI A225.1-1994. 10 (3) The manufacturer's setup specifications for that 11 type of home, model and location. 12 (4) Plans sealed by a registered professional engineer 13 or subrules established by the department, if: 14 (i) the design is engineered specifically for the 15 manufactured home; and 16 (ii) the designer used criteria specified in 17 paragraphs (1), (2) and (3). 18 (c) The homeowner shall be provided, prior to occupancy, 19 with a notarized certificate of installation from the installer 20 or, in the case of a new home, from the manufactured housing 21 dealer if the dealer arranged for the installation, which shall 22 state that the home was set up by the installer according to the 23 manufacturer's specifications for that home. The department 24 shall prepare and promulgate the certificate of installation to 25 be used by installers and manufactured housing dealers. 26 (d) Should any damage occur to the home in the future as a 27 result of improper initial installation or setup: 28 (1) If the dealer has arranged for installation, the 29 dealer and the installer shall be jointly and severally 30 liable for the cost of repairs resulting from the damage as 19970S0962B1058 - 3 -
1 long as it remains on the site where the home was originally 2 installed. 3 (2) If the dealer has not arranged for installation, the 4 installer shall be liable for the cost of repairs resulting 5 from the damage as long as it remains on the site where the 6 home was originally installed. 7 (3) If the home is transported or moved from the site 8 where the home was originally installed, all liability under 9 this subsection shall cease. 10 (4) This subsection shall not remove: 11 (i) the responsibility of an installer who 12 subsequently sets up the home at another location from 13 the original site of installation to install and set up 14 the home at the new site according to the manufacturer's 15 original setup specifications for that type of home, 16 model and location; or 17 (ii) the liability of an installer under 18 subparagraph (i) for repairs and replacement costs 19 resulting from improper installation or setup of the 20 home. 21 (e) The certificate of installation promulgated under 22 subsection (a), when completed, will certify that the 23 installation has been accomplished under this act. Within ten 24 days of the completion of the installation the following 25 requirements shall be met: 26 (1) A copy of the form shall be submitted to the 27 department. 28 (2) A copy shall be submitted to the manufacturer. 29 (3) A copy shall be submitted to the manufactured 30 housing dealer. 19970S0962B1058 - 4 -
1 (4) A copy shall be provided to the manufactured housing 2 owner. 3 (5) A copy shall be retained in the file of the 4 certified installer. 5 (f) At least one member of any installation or setup crew 6 involved in the installation of the manufactured home is 7 required to be certified under subsection (a). 8 (g) The department shall establish a filing fee in the 9 amount of $20 for each form certifying proper installation. The 10 department shall establish a certification fee of $100 per year 11 for each certified installer. 12 (h) The department is authorized to conduct inspections of 13 manufactured housing installations to ensure compliance with 14 this act. 15 (i) Upon inspection and investigation, the department shall 16 have the authority to suspend the certificate of any installer 17 if, based on good cause shown, the department is satisfied that 18 installation and setup done under the direction and control of 19 the licensed installer is not performed in accordance with 20 subsection (b). 21 (j) The requirements of this section shall apply to all 22 manufactured homes regardless of the date of manufacture. 23 Section 9.1. Industrialized Housing Account. 24 All fees and civil penalties collected under this act shall 25 be deposited in the Industrialized Housing Account established 26 in the act of May 11, 1972 (P.L.286, No.70), known as the 27 "Industrialized Housing Act." The department shall draw from the 28 account sufficient funds to cover the administrative and 29 enforcement costs of operating the program. Such funds are 30 hereby appropriated to the department to carry out the purposes 19970S0962B1058 - 5 -
1 of this act.
2 Section 3. This act shall take effect in 180 days.
D11L68JRW/19970S0962B1058 - 6 -